Our Products

Established in the trading & marketing of Bitumen also Fuel Oil since 1993

Bitumen 40/50

Report Test Result

ISO 31000:2018 50001:2018 14001:2015 9001:2015 18001:2007

Temperature  25.3 Pressure :   760 mmHg Humidity:40%
NO PROPERTY UNIT LIMIT TEST METOD
MIN MAX
1 Penetration @ 25°C Mm/10 40/50 D5
2 Softening Point °C 52/60 D36
3 Flash Point °C 250 MIN D92
4 Solubility in CS2 Wt% 99.5 MIN D-4
5 Ductility@25°C cm 100 MIN D113
6 SPECIFIC GRAVITY @25/25C Kg/cm3 1.01 -1.06 D 70
7 DROP IN penetration after heating % 20 MAX  D5-D6
8 LOSS ON HEATING(WT)% cm 0.2 MAX D6
9 Spot test Negative *A.A.S.H.O.T.102

Bitumen 40/60

Report Test Result

ISO 31000:2018 50001:2018 14001:2015 9001:2015 18001:2007

Temperature  25.3 Pressure :   760 mmHg Humidity:40%
NO PROPERTY UNIT LIMIT TEST METOD
MIN MAX
1 Penetration @ 25°C dmm. 40/60 EN 1426
2 Softening Point °C 48/56 EN 1427
3 Flash Point °C 230 MIN EN ISO 2592
4 Solubility in CS2 Wt% 99.0 MIN EN 12592
5 Ductility@25°C cm 100 MIN D113
6 Specific Gravity gr/Cm3 >= 0.99 EN 15326
7 Kinematic Viscosity@135°C mm2/s 325 EN 12595
8 LOSS ON HEATING TFOT % 0.5 MAX EN 12607 – 2
9 Spot test

 

Bitumen 50/70

Report Test Result
ISO 31000:2018 50001:2018 14001:2015 9001:2015 18001:2007
Temperature  25.2 °C Pressure :   760 mmHg Humidity:40%
NO PROPERTY UNIT LIMIT TEST METOD
MIN MAX
1 Penetration @ 25°C 100G 5Secs Mm/10 50-70 ASTM D5
2 Softening Point °C 49 -56 ASTM D36
3 Flash Point °C 230 MIN ASTM D92
4 Solubility in TCE Wt% 99 MIN ASTM D2042
5 Ductility@25°C cm 100 MIN ASTM D113
6 Density @ 25c Kg/cm3 1.01 – 1.06 ASTM D70
7 Mass change(loss in heating) % 0.8 MAX ASTM D1754
8 Retained penetration (T.F.O.T)% % 54 MIN ASTM D5
9 Spot test negative

Bitumen 60/70

Report Test Result
ISO 31000:2018 50001:2018 14001:2015 9001:2015 18001:2007
Temperature  25.3 Pressure :   760 mmHg Humidity:40%
NO PROPERTY UNIT LIMIT TEST METOD
MIN MAX
1 Penetration @ 25°C 100G 5Secs Mm/10 60 – 70 ASTM D5
2 Softening Point °C 49 – 56 ASTM D36
3 Flash Point °C 230 MIN ASTM D92
4 Solubility in TCE Wt% 99.5 MIN ASTM D2042
5   Ductility@25°C cm 100 MIN ASTM D113
6 Density @ 25c Kg/cm3 1.01 -1.06 ASTM 70
7 Mass change(loss in heating) % 0.8 MAX ASTM 1754
8 Retained penetration (T.F.O.T)% % 54 MIN ASTM D5
9 Ductility@25°C after hardening cm 50 MIN ASTM D113
10 Spot test negative

Bitumen 70/100

Report Test Result
ISO 31000:2018 50001:2018 14001:2015 9001:2015 18001:2007
Temperature  25.3 °C Pressure :   760 mmHg Humidity:40%
NO PROPERTY UNIT LIMIT TEST METOD
MIN MAX
1 Penetration @ 25°C 100G 5Secs Mm/10 70-100 ASTM D5
2 Softening Point °C 43 -51 ASTM D36
3 Flash Point °C 230 MIN ASTM D92
4 Solubility in TCE Wt% 99 MIN ASTM D4
5 Ductility@25°C cm 100 MIN ASTM D113
6 Spot test negatine
                               TEST ON RESIDUE FROM THIS FLLM OVEN TEST(ASTM D 1754)
1 Mass change(loss in heating) % 0.8 MAX ASTM D6
2 Retained penetration (T.F.O.T)% % 46 MIN ASTM D5

Bitumen 85/100

Report Test Result
ISO 31000:2018 50001:2018 14001:2015 9001:2015 18001:2007
Temperature  25.3 Pressure :   760 mmHg Humidity:30%
NO PROPERTY UNIT LIMIT Result TEST METOD
MIN MAX
1 Penetration @ 25°C 100G 5Secs Mm/10 85-100 97 ASTM D5
2 Softening Point °C 45 -52 49 ASTM D36
3 Flash Point °C 230 MIN 240 ASTM D92
4 Solubility in TCE Wt% 99 MIN 99.09 ASTM D2042
5 Ductility@25°C cm 100 MIN ≥100 ASTM D113
6 Density @ 25c Kg/cm3 1.01 – 1.06 1.05 ASTM 70
7 Spot Test – – neg A.A.S.H.O.T102
8 Mass change(loss in heating) % 0.8 MAX 0.4 ASTM D1754

Bitumen 120/150

Report Test Result
ISO 31000:2018 50001:2018 14001:2015 9001:2015 18001:2007
Temperature  25.3 °C Pressure :   760 mmHg Humidity:20%
NO PROPERTY UNIT LIMIT Result TEST METOD
MIN MAX
1 Penetration @ 25°C 100G 5Secs Mm/10 120-150 140 ASTM D5
2 Softening Point °C 43 -49 45 ASTM D36
3 Flash Point °C 230 MIN 236 ASTM D92
4 Solubility in TCE Wt% 99 MIN 99.89 ASTM D2042
5 INCREASE SOFTENNG PIONT cm 11 MAX 9 ASTM D36
TEST ON RESIDUE FROM THIS FLLM OVEN TEST(ASTM D 1754)
1 Mass change(loss in heating) % 0.8 MAX 0. 5 ASTM D6
2 Retained penetration (T.F.O.T)% % 43 min 58 ASTM D5
Softening Point After hardening °C 44 min 53 ASTM D36

Bitumen 160/220

Report Test Result
ISO 31000:2018 50001:2018 14001:2015 9001:2015 18001:2007
Temperature  25.3 °C Pressure :   760 mmHg Humidity:20%
NO PROPERTY UNIT LIMIT Result TEST METOD
MIN MAX
1 Penetration @ 25°C 100G 5Secs Mm/10 160-220 200 ASTM D5
2 Softening Point °C 35 -43 39 ASTM D36
3 Flash Point °C 230 MIN 238 ASTM D92
4 Solubility in TCE Wt% 99 MIN 99.89 ASTM D2042
5 INCREASE SOFTENNG PIONT cm 11 MAX 9 ASTM D36
TEST ON RESIDUE FROM THIS FLLM OVEN TEST(ASTM D 1754)
1 Mass change(loss in heating) % 1 MAX 0. 5 ASTM D6
2 Retained penetration (T.F.O.T)% % 37 min 68 ASTM D5
Softening Point After hardening °C 37 min 47 ASTM D36

VR

Report Test Result
ISO 31000:2018 50001:2018 14001:2015 9001:2015 18001:2007
Temperature  25 °C Pressure :   760 mmH Humidity:20%
NO PROPERTY UNIT LIMIT Result TEST METOD
MIN MAX
1 SP gr@ 25 c g/cm3 1.00-1.03 ASTM D3289
2 API Gravity — 7 – 12 ASTM D287
3 Sulphor content Wt% 5 – 6 ASTM D4294
4 Sediment & water content Vol% ——- trace ASTM D1796
5 Flash piont °c 260 /—- ASTM D92
6 Kinematic viscosity @ 100 c Cst 200 – 300 ASTM D6
7 Penetration @25 c – 100gr-5s 0.1 mm 300/—- ASTM D5
8 pourpoint c +20 – +40 ASTM D97

Bitumen VG30

Specification of bitumen grade VG30
ISO 31000:2018 50001:2018 14001:2015 9001:2015 18001:2007

Bitumen VG30 is a standard viscosity grade bitumen usually used as a paving grade bitumen suitable to be used in producing hot mix asphalt for road construction and production of asphalt pavements with superior properties as per following technical specification.

Absolute Viscosity at 60 °C, Poises Min.2400 IS 1206(Part 2)
Kinematic Viscosity at 135 °C, cSt Min.350 IS 1206(Part 3)
Flash Point (Cleveland Open Cup) °C Min.220 IS 1209
Solubility in Trichloroethylene, % Min.99 IS 1206
Softening Point (R&B), °C Min.47 IS 1205
Penetration @25 °C, 0.1 mm gm, 5 Sec Min.50 IS 1203
Tests on residue from thin film oven tests / RTFOT
Viscosity ratio at 60 °C Max. 4.0 IS 1206(Part 2)
Ductility at 25 °C, cm, after thin film oven test Min. 40 IS 1208
Specific Gravity @ 27/27 °C Min.0.99 IS 1202
Conforms to BIS (IS 73:2006) Specifications